Dry Pipe TotalPac2

TotalPac2 Dry Pipe units are available in the following configurations:

Standard Dry Pipe Systems:  This configuration utilizes a Viking Model F-1 Dry valve (rated at 175 psi - 12 Bar) which may be open by the fusing of a sprinkler head.  A Dry Pipe sprinkler system is a fire protection system which utilizes water as the extinguishing agent.  The system piping from the Dry Pipe Valve to the fusible sprinklers is filled with pressurized air or nitrogen.  One system may protect as much as 52,000 sq.ft. (4830.8 sq.m.) in a single fire area.  Available in 4" and 6" dia.

HP® (High-Pressure) Dry Pipe Systems:  This configuration utilizes a Viking Model E-1 Deluge valve and Riser Check valve rated at 250 psi and trimmed as a dry valve which will open by the fusing of a sprinkler head.  High pressure Dry Pipe systems are commonly used where sprinkler system supply pressures are above 175 psi (12 Bar), small systems where anti-freeze solutions are undesirable or when smaller conventional dry pipe valves are not available.  Available in 1½", 2", 3", 4" and 6" dia.

Applications:  TotalPac2 Dry Pipe Systems are primarily used to protect unheated structures or areas where the system is subject to freezing.  Under such circumstances, they may be installed in any structure to automatically protect the structure contents and/or personnel from loss due to fire.  The structure must be substantial enough to support the system piping when filled with water

Available Air Supply Styles:  Dry Pipe units are now available with 2 different air supplies styles to meet all applications:  Style A and B.  Click here for more details.