Skip to content
English
fireflex.com
  • There are no suggestions because the search field is empty.

When a New York Submittal Should Include an NYFD Kit or Jurisdiction-Specific FireFlex Option

A FireFlex Integrated Fire Protection System submittal should include an NYFD kit, remote annunciation, Class A circuit option, or other jurisdiction-specific feature when the project location, local filing requirement, specification, or approved design basis requires it. AHJs should verify that the submittal clearly identifies these options rather than assuming they are included by default.

Why it matters to an AHJ

Jurisdiction-specific options can affect supervision, wiring class, annunciation, and acceptance expectations. In New York, especially NYC, those details may influence plan approval and inspection readiness.

What the requirement / listing / document means

Configuration materials show that FireFlex options may include remote annunciator, Class A detection circuits, Class A signal circuits, relay modules, NYFD kit references, remote-control arrangements, seismic option, shut-off valve and sight glass, and semi-flanged connections.

For example, configuration material includes references such as: “NYFD Kit (Incl. Class A Mods)” and “Ensemble NYFD (Incluant modules de Classe A),” as well as remote annunciator and Class A circuit options in VACTEC® and clean agent forms. These references indicate that certain jurisdiction-sensitive options exist and must be intentionally specified and documented.

When to choose, request, verify, or reject it

Choose or request it when:

  • The project is in NYC and the permit or filing basis requires it
  • The fire alarm or releasing system design requires Class A pathways
  • Remote annunciation is required by the approved design or local enforcement
  • The specification explicitly calls for jurisdictional compliance options

Verify it when:

  • The product form shows the option, but drawings do not
  • The permit documents reference NYC or FDNY requirements
  • The control panel arrangement depends on that option

Reject or hold when:

  • The submittal claims NYC compliance but does not identify the relevant option
  • The option is shown in one part of the package but omitted from the bill of materials or drawings
  • The installed equipment does not match the approved permit set
What to review in submitted documents or field conditions

Review configuration sheets, panel schedules, riser or wiring diagrams, device pathways, shop drawings, jurisdiction notes, acceptance test scope, and actual installed nameplates and accessories.

Do not assume every New York project needs the same jurisdiction option. NYC conditions may differ from broader New York State enforcement practice, and final requirements should be confirmed with the applicable AHJ.

Short FAQ

Does every New York project require an NYFD kit?
No. That depends on the jurisdiction and project requirements.

Should the AHJ require the option to appear on the submitted documents clearly?
Yes. It should be identifiable in the approved package.

Can a remote annunciator be added later without review?
Possibly not. It may affect the approved configuration or local acceptance expectations.

Frequently Asked Questions

What is the safest AHJ approach if the jurisdiction-specific option is unclear?
Require clarification before approval.

Do these options affect acceptance testing?
Often yes, because annunciation and pathway behavior may need to be demonstrated.